Periodic maintenance - minimum stock of parts deemed necessary by analyzing fault situations on a monthly basis to make recommendations to the Production Manager regarding levels and maintenance frequencies.
Develop follow-up charts or cards related to maintenance schedules; To determine and eliminate the malfunction by intervening in case of a malfunction, to provide the necessary materials or to provide the necessary sketches, technical drawings and examples together with the dimensions and material specifications to ensure that the necessary ones are made in the interior/exterior workshops.
To propose all kinds of measures for the protection and development that can be done according to the types of faults and to keep the enterprise in working order continuously, and to be responsible for the implementation activities.
Assisting the Production Md. in the preparation of the lock equipment list, the lock equipment spare parts min. stock to follow the levels and to request them from the Production Manager in case of a decrease.
Preparing annual preventive and predictive maintenance plans and revising them when necessary.
Preparing daily care forms on a monthly basis and publishing them to workshops.
To follow predictive maintenance activities.
To comply with the occupational safety instructions and to use PPE (goggles, masks, gloves, etc.) as required by the instructions.
To clean and maintain the machinery, tools and apparatus assigned to his responsibility.
Leaving the machine, workbench or unit clean and tidy for the next operation.
To ensure that the leave, visit, etc. of the employees of the department are carried out according to Company Internal Regulations and To ensure that they act in accordance with quality procedures and instructions
To participate in the activities of the suggestion system and to ensure the participation of the employees affiliated to it.
Knowing the Information Security Management System (ISMS) Policy and fulfilling its requirements,
Acting in accordance with ISMS procedures and instructions in all activities related to information systems processes,
Acting according to the principle of "need-to-know" and the principle of "clean screen, clean table"
To raise awareness on the effective use of energy resources for the protection of the environment, to prevent waste, to reduce energy costs and to increase efficiency in energy use, and to support the studies for energy saving.
Responsibilities / Challenges
Machinery, bench, test or control devices in the enterprise; all kinds of equipment working with mechanical systems;
Maintenance and repair activities; Assembly and disassembly of machinery and facilities in new facilities or transports to be established.
To ensure that their work is carried out in accordance with the prepared programs.
Network / Relations / People or departments with whom it is in contact:
Superiors (Title): Production Manager
Subordinates (Title): Mechanical and Electrical Maintenance Officers
Bảo trì định kỳ - Tính số lượng lưu trữ tối thiểu cả những bộ phận được cho là cần thiết bằng cách phân tích các tình huống hư hỏng hằng tháng để đưa ra những đề nghị cho Giám đốc Sản xuất về mức độ và tần suất bảo trì.
Phát triển các biết đồ hoặc thẻ theo dõi liên quan đến lịch bảo trì. Xác định và loại bỏ sự cố bằng cách can thiệt trong trường hơp xảy ra sự cố, cung cấp các vật liệu cần thiết hoặc cung cấp các bản thảo, bảng vẽ kỹ thuật cần thiết hoặc ví dụ cùng với kích thước và tiêu chuẩn nguyên liệu nhằm đảm bảo những món đồ cần thiết được chế tạo trong nội bộ nhà máy hoặc ở bên ngoài.
Đề xuất tất cả các biện pháp bảo vệ và phát triển có thể thực hiện tùy theo các trạng thái hư hỏng và giữ cho công ty sản xuất đơn hàng liên tục và chịu trách nhiệm triển khai các hoạt động.
Trợ giúp Giám đốc Sản xuất trong việc lên danh sách các thiết bị, danh sách phụ tùng thiết bị, tồn kho tối thiểu tùy theo cấp độ và báo với Giám Đốc Sản xuất trong trường hợp số lượng bị giảm.
Chuẩn bị kế hoạch bảo trì ngăn ngừa và dự báo, cập nhật kế hoạch khi cần thiết.
Chuẩn bị mẫu kiểm tra hằng ngày vào mỗi tháng và công bố trong nhà máy.
Theo dõi các hoạt động bảo trì dự đoán.
Tuân thủ các hướng dẫn an toàn lao động và sử dụng các vật dụng bảo hộ (kính bảo hộ, khẩu trang, găng tay…) như được yêu cầu trong hướng dẫn
Vệ sinh và bảo trì máy móc, dụng cụ và các thiết bị được giao phụ trách
Giữ máy móc, bàn làm việc và thiết bị sạch sẽ và ngăn nắp cho ca làm việc tiếp theo.
Đảm bảo nhân viên thực hiện việc nghỉ phép, thăm viếng… theo Nội quy của Công ty và đảm bảo rằng họ thực hiện phù hợp với hướng dẫn và quy trình chất lượng.
Tham gia vào các hoạt động của hệ thống gợi ý và đảm bảo sự tham gia của các nhân viên trực thuộc.
Biết Chính sách Hệ thống Quản lý Bảo vệ Thông tin (ISMS) và thực hiện các yêu cầu của hệ thống.
Hoạt động tuân theo các quy trình và hướng dẫn của ISMS trongn tất cả các hoạt động liên quan đến quy trình hệ thống thông tin.
Hoạt động tuân theo nguyên tắc “need-to-know” và nguyên tắc “màn hình sạch, bàn làm việc sạch
Nâng Cao nhận thức việc sự dụng hiệu quả các nguồn năng lượng để bảo vệ môi trường, tránh lãng phí, giảm chi phí năng lượng và tăng hiệu suất sử dụng năng lượng, và nằm hỗ trợ các nghiên cứu tiết kiệm năng lượng.
Trách nhiệm chính:
Máy móc, bàn máy, thiết bị kiểm tra hoặc kiểm soát trong công ty, tất cả các thiết bị làm việc với hệ thống cơ khí.
Các hoạt động bảo trì và sửa chữa; Tháo lắp máy móc và thiết bị trong nhà xưởng mới hoặc trong việc vận chuyển.
Đảm bảo các công việc được thực hiện tuân theo các chương trình đã được chuẩn bị
Hệ thống / Các mối quan hệ / Những người hoặc bộ phận có liên quan:
Cấp trên (Chức danh): Giám đốc Sản xuất
Cấp dưới (Chức danh): Các nhân viên bảo trì điện và cơ khí
Nhân viên có cùng chức năng trong bộ phận:
Nội bộ: Tất cả các bộ phận
Bên ngoài: Các công ty bảo trì, các nhà thầu phụ
Yêu Cầu Công Việc
Graduated from Engineering Departments of technical schools or universities or vocational high school.
At least 5 years of experience in the mechanical departments of manufacturing companies
Knowledge / Technical Information:
Received and implemented TPM training.
Planned maintenance, Will be able to manage predictive maintenance activities